Home > Racks And Attachments > Attachments > J-Cups (Pair)
Alternative Views:	$400.00 Rack Upright: 3x3 Rack [Add $10.00] Qty:

Description   (1) Pair of J-Cups fit a 2"x2" rack or 3"x2". 3"x2" J-cups will be made 2" wide, 3" deep; holes are drilled on the 2" face. If your 3x2 rack has the hole on the 3" face and is 2", choose 3x3 option and leave measurements in notes on check out, please. For a 3x3 rack please select the appropriate option. J-cups are custom made and come with UHMW. When ordering in the "note box" on check out write the pin size you need to fit your rack. Black Textured Powder coated. *We recommend you do not drop weight from a height that can damage the J-Cup or your bar.* For GPR-378 Jcups, Leave in the notes on check out for GPR-378 (No need to choose any options) Tip when measuring your pin or hole size use 5" mark as your zero. The little end of a tape measure is not that accurate for small measurements. If you have any questions about measuring email me [email protected] ***If we have any questions about specs, we will contact you.*** Related Items Custom Rack Extensions Custom Uprights Swing In Safety Pair (Custom) Low Profile Spotters (Pair) $150.00 Add $165.00 Add $325.00 Add $325.00 Add Dip Bar Attachment Rack Landmine Custom Archway Rack Support Dip Handle Attachments $195.00 Add $125.00 Add $250.00 Add $200.00 Add Average Rating: 5 of 5 Total Reviews: 74 Write a review »

0 of 0 people found the following review helpful:

would not reccomend December 11, 2020 Reviewer: Tyler from Arizona   1 star Review rating is based off if I would reccomend to a friend. No and hell no. Took over three months to recieve, which had I been told that from start- no big deal. However when you finally get emailed back. You get blatant lies "1-2 weeks" multiple times. Save yourself the headache buy elsewhere. Was this review helpful to you?

1 of 1 people found the following review helpful:

Long Wait, Wrong Size, No Response August 20, 2020 Reviewer: Mike M. from Knoxville , TN United States   I've ordered a few different items from Black Widow during the pandemic time and I've had various experiences. All of the products I've received (cambered bar, spotter arms, and J-cups) have been built very well and I've been pleased with the quality of their products, but the customer service/experience has been less than desirable. The spotter arms and J-cups were both custom and took around two months to receive, which I understand due to the crazy high volume and custom nature of the builds. The tough part has been the delayed/lack of response from Black Widow when I tried to check-in about 6-weeks after I placed the order, and again when I received the wrong size of J-cups. I've emailed and Instagram messaged them twice trying to figure out how to get a refund/the correct size but keep getting either no response or the automated one. I'll update this once I get a response, but until then I have a set of J-cups that I waited months to receive that are completely useless to me. Was this review helpful to you?

0 of 0 people found the following review helpful:

Update to my 8/3/2020 review August 4, 2020 Reviewer: Chris Coyle from Pennsylvania   In response to the reviewer who noted that the UHMW screws aren't countersunk (recessed), mine are flush or just barely recessed.  Definitely not protruding, so I'm not worried about contact with the bar knurling.  My cheapie Titans are recessed maybe 1/8 inch.  The difference is not a problem as far as I'm concerned.   The horizontal surface of the BWTG J-cups is 2 1/4 inches.  My Titans are 2 7/8.  I prefer the shorter length. Was this review helpful to you?

0 of 0 people found the following review helpful:

Great quality, perfect fit, worth it August 3, 2020 Reviewer: Chris Coyle from Pennsylvania   J-cups came today and fit perfectly on my old rack with 1" holes on 3" centers.  Quality is, of course, top notch.  No UHMW on the front lips, just bare metal, but that's the same as every brand I've ever seen. I just stretch some old bicycle inner tube over the lips to protect my bar. Gonna use these for the heavy stuff and relegate my cheapie Titans to lighter duty where a failure won't maim me. This is my 3rd BWTG purchase. Neutral grip viking press handle and swiss bar were the others.  I don't mind paying extra for high quality, handmade American gear that I know will outlive me. Was this review helpful to you?

0 of 0 people found the following review helpful:

J Cups July 16, 2020 Reviewer: Kevin from Wilmington NC   High quality product! Perfect addition to my Elitefts R3 Was this review helpful to you?

View All Customer Reviews